With a powerful engine and heavy-duty metal construction, the Cub Cadet LTX 1045 is a logical choice for homeowners with larger outdoor areas that need to look professional from early spring through late fall. Those customers new to the LTX 1045 might want to make sure that they understand exactly how to use, drive, and control the mower before they head out to get a bit of work done. A good understanding of the mower’s operation will not only guard against injury, but also protect against unwanted engine damage or other difficulties that can result from even one misplaced throttle or switch.
The Controls: What to Know When Operating the LTX 1045
Throttle and Choke Controls
The throttle and choke controls are often combined into a single lever to the driver’s left, and each of these levers is instrumental in making sure the mower can turn on and travel at the desired speed. Push the throttle forward to accelerate, or move it backward to slow down. Always make sure the choke side of this lever is in the proper position prior to starting the equipment, or it simply will not start at all.
The deck lift lever is located on the mower’s right fender and it can be used to adjust cutting height, work around obstacles, or avoid debris. Simply pull the lever to the left and then move it to the desired height for cutting or other purposes.
When the key is inserted into the ignition switch, the mower can be started by giving the key a turn clockwise until it reaches the “on” or “run” indicator. Turning the key a full turn counter-clockwise at the end of a mowing task will stop the engine and allow the mower to be safely stored.
Drive, Reverse, and Brake Pedals
Anyone familiar with a vehicle will feel right at home with these pedals after a little adjustment and adaptation. The drive pedal moves the mower forward at a greater speed when pressed with greater force. The reverse pedal can send the mower backward at varying speeds based on the operator’s level of pressure, and the brake will bring the equipment to a complete stop.
Starting and Stopping the LTX 1045’s Engine
To get the engine going, place the mower’s ignition key into the ignition switch and then place the blade engage knob into the “off” or disengaged position. Next, make sure the mower’s parking brake is engaged. It may be necessary to activate the choke control on the mower by moving it all the way forward before starting the equipment.
With the choke control in the proper position and the mower key still in the ignition, turn the key clockwise until it reaches the “start” or “on” position. Release the key and allow the mower to run for a few moments so that the engine warms up. As the key is released, it will rotate back slightly to the “normal mowing” position. This action is completely normal. Before mowing, deactivate the choke.
To stop the engine, disengage the blades and place the throttle control into the “slow” position. Turn the ignition key counterclockwise until it reaches “stop” and then remove the key from the equipment entirely.
Gaining Speed: A Primer on Driving the Mower
The Cub Cadet is among the most consumer-friendly mowers on the market when it comes to driving the equipment. Tap the brake pedal lightly to release the parking brake and then simply press down on the drive pedal. This will cause the mower to move forward at a rate of speed determined by how hard the pedal is pressed. To move in reverse, let the foot off the drive pedal, engage the brake, and then use the reverse pedal in much the same way.
One Last Thing: Be Sure to Follow Best Practices for Safety
Though Cub Cadet’s mowers are designed to expertly accommodate residential buyers, they do still require a strict code of safety and precaution to guard against unwanted injury. Whether it’s the sharpness of the blades, the power of the engine, or the prospect of debris-related injuries, simple safety procedures can help erase these concerns.
1. Always turn the mower on while in the operator’s position. Never leave the mower running without being the operator’s position, as this can increase the risk of engine complications, debris injuries, and other serious risks.
2. When performing maintenance or repairs, or simply starting the equipment, do so outdoors in a wide-open area. Performing these activities in an enclosed space can lead to serious injury in some cases. Always use OEM parts if replacement parts are needed.
3. Inspect the lawn for toys, debris, and even people or pets before using the mower. If the blades encounter any people, pats, or personal items, significant injuries can result.
For Mowers, Parts and More, Visit CubParts.com
CubParts.com is a great resource for new Cub Cadet LTX 1045 mower owners. The site is full of helpful tips and resources, as well as a full selection of OEM parts that can be used to address routine maintenance needs, common repairs, and even the occasional need for accessorizing and extending this particular model. Visit CubParts.com to get started with great mower maintenance and safe operation throughout the year.